Hanger(Clamp) Series:
The Hanger is mainly used for the fixation between RF cable and tower, cable ladder etc, which is mainly
composed of stainless steel and anti-ultraviolet polypropylene or ABS engineering plastics and anti-old rubber,and can be used in different range of temperatures. We manufacture various hangers to meet defferent requirements of our clients

Through type Stainless Steel Hanger

Part No.	Description	Photo
D	1/2" single-stack Hanger
E	1/2" Double-stack Hanger
F	1/2" Triple-stack Hanger
G	7/8" single-stack Hanger
H	7/8" Double-stack Hanger
I	7/8" Triple-stack Hanger
J	1 1/4" single-stack Hanger
K	1 1/4" Double-stack Hanger
L	1 1/4" Triple-stack Hanger
M	1 5/8" single-stack Hanger
N	1 5/8" Double-stack Hanger
O	1 5/8" Triple-stack Hanger

Tie Tight type Stainless Steel Hanger

Part No.	Description	Photo
A	1/2"single-stack Hanger
B	1/2"Double-stack Hanger
C	1/2"Triple-stack Hanger
D	7/8"single-stack Hanger
E	7/8"Double-stack Hanger
F	7/8"Triple-stack Hanger
G	1 1/4"single-stack Hanger
H	1 1/4"Double-stack Hanger
I	1 1/4"Triple-stack Hanger
J	1 5/8" single-stack Hanger
K	1 5/8"Double-stack Hanger
L	1 5/8"Triple-stack Hanger

Wall  Stainless Steel Hanger

Part No.	Description	Photo
A	1/2"single-stack Hanger
B	1/2"Double-stack Hanger
C	1/2"Triple-stack Hanger
D	7/8"single-stack Hanger
E	7/8"Double-stack Hanger
F	7/8"Triple-stack Hanger
G	1 1/4"single-stack Hanger
H	1 1/4"Double-stack Hanger
I	1 1/4"Triple-stack Hanger
J	1 5/8" single-stack Hanger
K	1 5/8"Double-stack Hanger
L	1 5/8"Triple-stack Hanger

Two Hole type Stainless Steel Hanger

Part No.	Description	Photo
A	1/2"single-stack Hanger
B	1/2"Double-stack Hanger
C	1/2"Triple-stack Hanger
D	7/8"single-stack Hanger
E	7/8"Double-stack Hanger
F	7/8"Triple-stack Hanger

Suspend Hamulus type Stainless Steel Hanger

Part No.	Description	Photo
A	1/2"single-stack Hanger
B	1/2"Double-stack Hanger
C	1/2"Triple-stack Hanger
D	7/8"single-stack Hanger
E	7/8"Double-stack Hanger
F	7/8"Triple-stack Hanger
G	1 1/4"single-stack Hanger
H	1 1/4"Double-stack Hanger
I	1 1/4"Triple-stack Hanger
J	1 5/8" single-stack Hanger
K	1 5/8"Double-stack Hanger
L	1 5/8"Triple-stack Hanger

Anchor Ear type Stainless Steel Hanger

Part No.	Description	Photo
A	1/2"single-stack Hanger
B	7/8"single-stack Hanger
C	1 1/4"single-stack Hanger
D	1 5/8" single-stack Hanger
E	1/2"Double-stack Hanger
F	7/8"Double-stack Hanger
G	1 1/4"Double-stack Hanger
H	1 5/8" Double-stack Hanger

Anchor Ear type Stainless Steel Hanger For Elliptical waveguide

Part No.	Description	Photo
A	BT-60
B	BT-60X
C	BT-80
D	BT-80X
E	BT-34

Wall Side Attachment kits Stainless Steel Hanger

Part No.	Description	Photo
A	1/2" ΦD=13.5MM
B	1/2" ΦD=16.5MM
C	7/8" ΦD=24.5MM
D	7/8" ΦD=27.5MM

Snap In Stainless Steel Hanger

Part No.	Description	Photo
A	7/8" ΦD=27.5MM
B	1-1/4" ΦD=39.5MM
C	1-5/8" ΦD=50.0MM
D	1-5/8" ΦD=50.0MM

Snap In Stainless Steel Hanger

Part No.	Description	Photo
A	7/8" ΦD=27.5MM
B	1-1/4" ΦD=39.5MM
C	1-5/8" ΦD=50.0MM
D	1-5/8" ΦD=50.0MM

Hanger Specification General: Hanger is mainly composed of polypropylene or ABS plastic, stainless steel clamp, and can hang one or more  cables. It is fit for 7/8" feeder, waveguide cable and so on.